GODIAG GT100+ OBDII Breakout Box Diagnostic Port Tester ECU Bench Connector

GODIAG GT100+ OBDII Breakout Box Diagnostic Port Tester ECU Bench Connector. Match this electrical test tool to the circuit or module you service and check the supplied connections before purchase.

Choose your configuration

• Option: US Plug; EU Plug
• Specification: US Plug; EU Plug

Source-listed specifications

• Increase electronic current display. By connecting the ECU module to the banana interface or the DB25 cable, you can visually see the current display of the ECU, which can make your job much easier
• Use with Xhorse VVDI2, Autel equipment, Launch, Foxwell, etc
• Convert the OBD1 diagnostic port to the standard OBD2 diagnostic port

Listed package items

• -1 host
• -1 OBD 2-in-1 extension cable
• -1 color jumper
• -1 plug adapter
• -1 120 ohm resistor
• -6 banana plugs
• -24 wire fittings, DuPont 2.54 mm connector female pin

Before ordering

Confirm which specifications apply to the selected option. Multiple hardware or voltage alternatives in the source are not established as features of every variant. Check the actual package contents; support for an accessory does not mean it is included.

Confirm supported models, control modules, software version, licenses and required adapters. Programming and electrical tests should be performed by a qualified technician following the equipment instructions. Not every listed function is available on every vehicle.