2.4G Wireless Transmitter Receiver Camera Transmitter Wireless Device for Truck and Bus

2.4G Wireless Transmitter Receiver Camera Transmitter Wireless Device for Truck and Bus. Compare the listed camera coverage, display or recording features and installation requirements for your vehicle setup.

Choose your configuration

• Option: Wireless Transmitter Receiver Camera Device

Source-listed specifications

• AHD wireless transmitter receiver, suitable for wired truck camera transmitter up to 1080P panoramic wireless set, wireless working distance 200-300 meters. Mainly used for long-distance trucks, camping trailers, trucks with trailers.
• Support AHD/TVI/CVI signal input and output (transmitter supports 720P, 1080P, CVBS signals, receiver video output is AHD 720P PAL). 12V-36V working voltage, suitable for different vehicles.
• Can transmit 1080p AHD/HDCVI/HDTVI CVBS signals
• Wide signal coverage, wireless distance up to 200-300m
• The receiver output of the monitor is 720p PAL format
• Power input: 12V-36V
• RF band: 12Mbps
• Frequency: 2400-2483.5 MHZ
• Modulation: QPSK/16QAM
• Working distance: 200-300m
• Receiving sensitivity: -86dBm QPSK
• Jump rate: 1200/S
• Resolution: 1080P 25F/S
• Compression code: H.264
• Maximum delay: 100ms
• TX Video AHD/TVI/CVI 1080P
• RX Video AHD/TVI/CVI 720P (1080P is not recommended because the image is unstable and there will be freezes)
• Operating temperature: -20 to +80 degrees Celsius
• Operating humidity: 85% relative humidity

Before ordering

Confirm which specifications apply to the selected option. Multiple hardware or voltage alternatives in the source are not established as features of every variant. Check the actual package contents; support for an accessory does not mean it is included.

Confirm the number of supplied cameras, recorded versus displayed resolution, cable lengths and installation voltage. Weather ratings apply only to the component identified by the supplier. Camera images do not replace mirrors and direct observation.