For Samsung Galaxy S26 Ultra 5G SM-S948B Original LCD Screen with Digitizer Full Assembly, For Samsung Galaxy S26 Ultra 5G(Original)

About the product 
1. LCD display + touch screen digitizer assembly replacement for Samsung Galaxy S26 Ultra 5G SM-S948B.
2. Replace the old, broken, cracked, damaged one.
3. Make your device look more refreshing than ever.
4. Completely fit and work.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile device. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Professional Repair Reminders

• ESD Safety First: Always ground yourself with an ESD strap during installation. The S26 Ultra's internal circuitry is highly sensitive to static.

• Critical Pre-Test: Connect the flex cable to the motherboard and test all touch/display functions before final sealing or removing protective films.

• Flex Cable Caution: The LCD cable is extremely delicate. Ensure it is not bent over 90 degrees during the installation process to avoid display failure.